Metric Carburized & Hardened Miter Gears Module 2~5

Specifications
Precision grade 5	JIS B 1704 grade 5	Core hardness	HRC7095
Gear teeth	Gleason	Surface hardness	HRC7095
Pressure angle	20	Surface treatment	-
Material	SMF5040 (Carbon steel)	Surface finish	Sintered
Heat treatment	-	Datum reference surface for teeth cutting	Bore

20 Miter Module 0.81.5

Catalog No.	Module	No. of teeth	Bore	Hub dia.	Pitch dia.	Outside dia.	Mounting distance	Total length	Crown to back length	Hub width	Length of bore	Face width	Holding surface dia.	Face angle	Shape	Allowable torque (kgfm)		Allowable torque (Nm)		Backlash (mm)	Weight (kgf)	Catalog No.
Catalog No.	m	z	A	B	C	D	E	F	G	H	I	J	K	L	Shape	Bending strength	Surface durability	Bending strength	Surface durability	Backlash (mm)	Weight (kgf)	Catalog No.
LM0.8-20 [ DXF\| DWG\| 3D CAD] LM1-20 [ DXF\| DWG\| 3D CAD] LM1.25-20 [ DXF\| DWG\| 3D CAD] LM1.5-20 [ DXF\| DWG\| 3D CAD]	0.8 1 1.25 1.5	20 20 20 20	4 5 6 6	12 16 22 26	16 20 25 30	17.13 21.41 26.77 32.12	16 20 23 30	11 13.5 15 21	8.57 10.71 11.38 16.06	6 8 9 13	11 13.5 15 21	4.24 4.95 6.36 8.48	- - - -	4948' 4948' 4948' 4948'	B1 B1 B1 B1	0.0221 0.0416 0.0826 0.1509	0.0027 0.0051 0.0101 0.0189	0.2167 0.408 0.81 1.48	0.0265 0.05 0.099 0.1853	00.16 00.18 00.2 00.22	0.01 0.022 0.037 0.07	LM0.8-20 LM1-20 LM1.25-20 LM1.5-20

Pitch Angle 45

CAUTION: The allowable torques shown in the table are calculated according to JGMA Standards 403-01 and 404-01.

CAUTION: The rust prevention process involves treating the gears with steam (in effect, creating surface oxidation). The black oxide treatment cannot be done on these gears.

NOTE:
The allowable torques shown in the table are calculated according to JGMA Standards 403-01 and 404-01.

USEFUL HINT :
Miter gears are bevel gears with a 1 : 1 gear ratio. There are two types, straight miter and spiral miter, according to straight or curved gear tooth.

*CAUTION:*	The allowable torques shown in the table are calculated according to JGMA Standards 403-01 and 404-01.
*CAUTION:*	The rust prevention process involves treating the gears with steam (in effect, creating surface oxidation). The black oxide treatment cannot be done on these gears.
*NOTE:*	The allowable torques shown in the table are calculated according to JGMA Standards 403-01 and 404-01.
*USEFUL HINT :*	Miter gears are bevel gears with a 1 : 1 gear ratio. There are two types, straight miter and spiral miter, according to straight or curved gear tooth.

| Home | QTC Quote Request Form | US&Canada Request Form | International Request Form | Q410 Index | Recent Ads