Specifications Precision grade JIS Grade N9 (JIS B 1702-1:1998) JIS Grade 5 (JIS B 1702:1976) Core hardness HRR115120 Gear teeth Standard full depth Surface hardness Pressure angle 20 Surface treatment - Material MC901 Nylon with SUS303 Stainless Steel core Surface finish Hobbed Heat treatment - Datum reference surface for gear cutting Bore

S1

Module 1

Catalog No.	Module	No. of teeth	Bore	Hub dia.	Pitch dia.	Outside dia.	Face width	Hub width	Total length	Metal core dia.	Shape	Allowable torque(kgfm)	Allowable torque(Nm)	Backlash (mm)	Weight (kgf)	Catalog No.
	m	z	AH7	B	C	D	E	F	G	H		Bending strength	Bending strength
PU1-30 [ DXF| DWG| 3D CAD] PU1-35 [ DXF| DWG| 3D CAD] PU1-40 [ DXF| DWG| 3D CAD] PU1-50 [ DXF| DWG| 3D CAD] PU1-60 [ DXF| DWG| 3D CAD] PU1-80 [ DXF| DWG| 3D CAD]	1 1 1 1 1 1	30 35 40 50 60 80	8 8 10 10 10 10	20 25 25 30 40 40	30 35 40 50 60 80	32 37 42 52 62 82	10 10 10 10 10 10	10 10 10 10 10 10	20 20 20 20 20 20	20 25 28 34 45 45	S1 S1 S1 S1 S1 S1	0.1045 0.1275 0.1511 0.1995 0.246 0.3401	1.025 1.25 1.482 1.956 2.412 3.335	0.120.26 0.120.26 0.120.26 0.120.26 0.140.28 0.140.28	0.05 0.08 0.08 0.13 0.23 0.25	PU1-30 PU1-35 PU1-40 PU1-50 PU1-60 PU1-80

Module 1.5

Catalog No.	Module	No. of teeth	Bore	Hub dia.	Pitch dia.	Outside dia.	Face width	Hub width	Total length	Metal core dia.	Shape	Allowable torque(kgfm)	Allowable torque(Nm)	Backlash (mm)	Weight (kgf)	Catalog No.
	m	z	AH7	B	C	D	E	F	G	H		Bending strength	Bending strength
PU1.5-30 [ DXF| DWG| 3D CAD] PU1.5-35 [ DXF| DWG| 3D CAD] PU1.5-40 [ DXF| DWG| 3D CAD] PU1.5-50 [ DXF| DWG| 3D CAD] PU1.5-60 [ DXF| DWG| 3D CAD] PU1.5-80 [ DXF| DWG| 3D CAD]	1.5 1.5 1.5 1.5 1.5 1.5	30 35 40 50 60 80	10 10 10 12 12 12	30 33 40 40 50 60	45 52.5 60 75 90 120	48 55.5 63 78 93 123	15 15 15 15 15 15	12 12 12 12 12 12	27 27 27 27 27 27	30 36 45 45 55 85	S1 S1 S1 S1 S1 S1	0.3528 0.4305 0.51 0.6734 0.8302 1.148	3.46 4.222 5.001 6.604 8.141 11.26	0.140.3 0.160.32 0.160.32 0.160.32 0.160.32 0.180.36	0.15 0.21 0.31 0.34 0.52 1	PU1.5-30 PU1.5-35 PU1.5-40 PU1.5-50 PU1.5-60 PU1.5-80

Module 2

Catalog No.	Module	No. of teeth	Bore	Hub dia.	Pitch dia.	Outside dia.	Face width	Hub width	Total length	Metal core dia.	Shape	Allowable torque(kgfm)	Allowable torque(Nm)	Backlash (mm)	Weight (kgf)	Catalog No.
	m	z	AH7	B	C	D	E	F	G	H		Bending strength	Bending strength
PU2-20 [ DXF| DWG| 3D CAD] PU2-25 [ DXF| DWG| 3D CAD] PU2-30 [ DXF| DWG| 3D CAD] PU2-35 [ DXF| DWG| 3D CAD] PU2-40 [ DXF| DWG| 3D CAD] PU2-50 [ DXF| DWG| 3D CAD] PU2-60 [ DXF| DWG| 3D CAD]	2 2 2 2 2 2 2	20 25 30 35 40 50 60	10 10 10 12 15 15 15	22 30 35 40 55 60 60	40 50 60 70 80 100 120	44 54 64 74 84 104 124	20 20 20 20 20 20 20	14 14 14 14 14 14 14	34 34 34 34 34 34 34	22 30 35 45 60 65 85	S1 S1 S1 S1 S1 S1 S1	0.5005 0.667 0.8363 1.02 1.209 1.596 1.968	4.908 6.541 8.201 10 11.86 15.65 19.3	0.180.34 0.180.34 0.20.36 0.20.36 0.20.36 0.20.36 0.220.38	0.1 0.2 0.28 0.41 0.71 0.9 1.3	PU2-20 PU2-25 PU2-30 PU2-35 PU2-40 PU2-50 PU2-60

CAUTION: Although the holding strength at the material interface is designed to be stronger than the teeth, a secondary operation may weaken the holding strength.

CAUTION: When the core O.D. is the same as the hub diameter, you may see some serration on the hub. There is no effect on the strength of the gear due to these serrations.

NOTE: The allowable torques shown in the table are calculated using the Lewis formula. The backlash values shown are the theoretical values of a pair of identical gears in mesh. All dimensions shown in the above table(s) are listed in millimeters unless otherwise specified.

 

	| Home | QTC Quote Request Form | US&Canada Request Form | International Request Form | Q410 Index | Recent Ads Quality Transmission Components E-Mail: qtcsupport@qtcgears.com Phone: 516-437-6700 Fax: 800-737-7436 or 516-328-3343
Related Companies: