Specifications Precision grade JIS Grade N8 (JIS B 1702-1:1998) JIS Grade 4 (JIS B 1702:1976) Core hardness less than HB187 Gear teeth Standard full depth Surface hardness Pressure angle 20 Surface treatment - Material SUS303 Stainless Steel Surface finish Hobbed Heat treatment - Datum reference surface for gear cutting Bore

S1 S3

Module 0.8

Catalog No.	Module	No. of teeth	Bore Note 1	Hub dia.	Pitch dia.	Outside dia.	Face width	Hub width	Total length	Socket head cap screw Note 2			Shape	Allowable torque (kgfm)		Allowable torque (Nm)		Recommended fastening torque Note 3		Backlash (mm) Note 4	Weight (kgf)	Catalog No.
	m	z	AH7	B	C	D	E	F	G	Thread	J	K		Bending strength	Surface durability	Bending strength	Surface durability	(kgfcm)	(Nm)
SUSL0.8-14 [ DXF| DWG| 3D CAD] SUSL0.8-15 [ DXF| DWG| 3D CAD] SUSL0.8-16 [ DXF| DWG| 3D CAD] SUSL0.8-18 [ DXF| DWG| 3D CAD] SUSL0.8-20 [ DXF| DWG| 3D CAD]	0.8 0.8 0.8 0.8 0.8	14 15 16 18 20	4 4 4 4 4	14 14 14 14 14	11.2 12 12.8 14.4 16	12.8 13.6 14.4 16 17.6	7 7 7 7 5	8 8 8 8 8	22 22 22 22 13	M2.5 M2.5 M2.5 M2.5 M2.5	3.3 3.3 3.3 3.3 3.3	4.4 4.4 4.4 4.4 4.4	S3 S3 S3 S3 S1	0.0834 0.0933 0.1033 0.124 0.1036	0.0049 0.0057 0.0066 0.0085 0.0077	0.8179 0.915 1.013 1.216 1.016	0.0481 0.0559 0.0647 0.0834 0.0755	6.12 6.12 6.12 6.12 6.12	0.6 0.6 0.6 0.6 0.6	0.050.1 0.050.1 0.050.1 0.050.1 0.050.1	0.02 0.02 0.02 0.02 0.02	SUSL0.8-14 SUSL0.8-15 SUSL0.8-16 SUSL0.8-18 SUSL0.8-20
SUSL0.8-22 [ DXF| DWG| 3D CAD] SUSL0.8-24 [ DXF| DWG| 3D CAD] SUSL0.8-25 [ DXF| DWG| 3D CAD] SUSL0.8-28 [ DXF| DWG| 3D CAD] SUSL0.8-30 [ DXF| DWG| 3D CAD]	0.8 0.8 0.8 0.8 0.8	22 24 25 28 30	4 5 5 5 5	14 14 14 14 14	17.6 19.2 20 22.4 24	19.2 20.8 21.6 24 25.6	5 5 5 5 5	8 8 8 8 8	13 13 13 13 13	M2.5 M2.5 M2.5 M2.5 M2.5	3.3 3.3 3.3 3.3 3.3	4.4 4.4 4.4 4.4 4.4	S1 S1 S1 S1 S1	0.119 0.1347 0.1426 0.1666 0.1829	0.0093 0.0112 0.0121 0.0154 0.0178	1.167 1.321 1.398 1.634 1.794	0.0912 0.1098 0.1187 0.151 0.1746	6.12 6.12 6.12 6.12 6.12	0.6 0.6 0.6 0.6 0.6	0.050.1 0.050.1 0.050.1 0.050.1 0.050.1	0.02 0.02 0.02 0.02 0.02	SUSL0.8-22 SUSL0.8-24 SUSL0.8-25 SUSL0.8-28 SUSL0.8-30
SUSL0.8-32 [ DXF| DWG| 3D CAD] SUSL0.8-36 [ DXF| DWG| 3D CAD] SUSL0.8-40 [ DXF| DWG| 3D CAD] SUSL0.8-45 [ DXF| DWG| 3D CAD] SUSL0.8-48 [ DXF| DWG| 3D CAD]	0.8 0.8 0.8 0.8 0.8	32 36 40 45 48	5 6 6 6 6	14 17 17 17 17	25.6 28.8 32 36 38.4	27.2 30.4 33.6 37.6 40	5 5 5 5 5	8 10 10 10 10	13 15 15 15 15	M2.5 M3 M3 M3 M3	3.3 4 4 4 4	4.4 6.2 6.2 6.2 6.2	S1 S1 S1 S1 S1	0.1992 0.2323 0.2658 0.3081 0.3336	0.0204 0.0262 0.0327 0.042 0.0481	1.953 2.278 2.607 3.021 3.271	0.2001 0.2569 0.3207 0.4119 0.4717	6.12 6.12 6.12 6.12 6.12	0.6 0.6 0.6 0.6 0.6	0.050.1 0.050.1 0.050.1 0.050.1 0.050.1	0.02 0.04 0.04 0.06 0.06	SUSL0.8-32 SUSL0.8-36 SUSL0.8-40 SUSL0.8-45 SUSL0.8-48
SUSL0.8-50 [ DXF| DWG| 3D CAD] SUSL0.8-54 [ DXF| DWG| 3D CAD] SUSL0.8-56 [ DXF| DWG| 3D CAD] SUSL0.8-60 [ DXF| DWG| 3D CAD] SUSL0.8-64 [ DXF| DWG| 3D CAD]	0.8 0.8 0.8 0.8 0.8	50 54 56 60 64	6 6 6 8 8	17 17 17 17 17	40 43.2 44.8 48 51.2	41.6 44.8 46.4 49.6 52.8	5 5 5 5 5	10 10 10 10 10	15 15 15 15 15	M3 M3 M3 M3 M3	4 4 4 4.5 4.5	6.2 6.2 6.2 6 6	S1 S1 S1 S1 S1	0.3507 0.3851 0.4023 0.4369 0.4716	0.0525 0.0617 0.0667 0.0771 0.0883	3.439 3.777 3.945 4.284 4.625	0.5148 0.6051 0.6541 0.7561 0.8659	6.12 6.12 6.12 8.16 8.16	0.6 0.6 0.6 0.8 0.8	0.050.1 0.050.1 0.050.1 0.050.1 0.050.1	0.06 0.06 0.08 0.08 0.08	SUSL0.8-50 SUSL0.8-54 SUSL0.8-56 SUSL0.8-60 SUSL0.8-64
SUSL0.8-72 [ DXF| DWG| 3D CAD] SUSL0.8-80 [ DXF| DWG| 3D CAD] SUSL0.8-90 [ DXF| DWG| 3D CAD] SUSL0.8-100 [ DXF| DWG| 3D CAD]	0.8 0.8 0.8 0.8	72 80 90 100	8 10 10 10	17 24 24 24	57.6 64 72 80	59.2 65.6 73.6 81.6	5 5 5 5	10 14 14 14	15 19 19 19	M3 M4 M4 M4	4.5 5.3 5.3 5.3	6 7.7 7.7 7.7	S1 S1 S1 S1	0.5413 0.6113 0.6991 0.7873	0.1131 0.141 0.1804 0.2255	5.308 5.995 6.856 7.721	1.109 1.383 1.769 2.211	8.16 8.16 8.16 8.16	0.8 0.8 0.8 0.8	0.050.1 0.050.1 0.050.1 0.050.1	0.1 0.16 0.2 0.22	SUSL0.8-72 SUSL0.8-80 SUSL0.8-90 SUSL0.8-100

CAUTION: The slip torque which is dependent on the fastening torque can sometimes be less than the gear strength. Please use caution in selecting. The chart on the right shows the relationship between the slip torque and the fastening torque.

Fastening torque vs. Slip torque

NOTE 1: The bore cannot be modified. It is possible to pin the gear to the shaft to prevent slippage.
NOTE 2: The allowable torques shown in the table are the calculated values according to JGMA Standards 401-01 and 402-01.
NOTE 3: Do not tighten the clamping screw without first inserting a shaft, or the bore will be permanently deformed and will not accept a shaft.
NOTE 4: The backlash values shown are the theoretical values of a pair of identical gears in mesh.
All dimensions shown in the above table(s) are listed in millimeters unless otherwise specified.

 

	| Home | QTC Quote Request Form | US&Canada Request Form | International Request Form | Q410 Index | Recent Ads Quality Transmission Components E-Mail: qtcsupport@qtcgears.com Phone: 516-437-6700 Fax: 800-737-7436 or 516-328-3343
Related Companies: