|
|
|
  |
 
 |
|
|
| ||||||||||||||||||||||||
|
Module 2
| Catalog No. | No. of teeth | Bore | Hub dia. | Pitch dia. | Outside dia. | Face width | Hub width | Total length | Web thickness | Web O.D. | Shape | Allowable torque(kgf  m) |
Allowable torque(N m) |
Backlash (mm) |
Weight (kgf) |
Catalog No. | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| z | AH7 | B | C | D | E | F | G | H | I | Bending strength |
Surface durability |
Bending strength |
Surface durability | |||||
| SS2-12 [ DXF| DWG| 3D CAD] SS2-13 [ DXF| DWG| 3D CAD] SS2-14 [ DXF| DWG| 3D CAD] SS2-15 [ DXF| DWG| 3D CAD] SS2-16 [ DXF| DWG| 3D CAD] |
12 13 14 15 16 |
10 10 10 12 12 |
18 20 20 24 26 |
24 26 28 30 32 |
28 30 32 34 36 |
20 20 20 20 20 |
10 10 10 10 10 |
30 30 30 30 30 |
- - - - - |
- - - - - |
S1 S1 S1 S1 S1 |
2.076 2.382 2.694 3.014 3.339 |
0.0899 0.1088 0.1289 0.1508 0.1746 |
20.36 23.36 26.42 29.56 32.74 |
0.8816 1.067 1.264 1.479 1.712 |
0.12 0.260.12 0.260.12 0.260.12 0.260.12 0.26 |
0.09 0.1 0.1 0.11 0.15 |
SS2-12 SS2-13 SS2-14 SS2-15 SS2-16 |
| SS2-17 [ DXF| DWG| 3D CAD] SS2-18 [ DXF| DWG| 3D CAD] SS2-19 [ DXF| DWG| 3D CAD] SS2-20 [ DXF| DWG| 3D CAD] SS2-21 [ DXF| DWG| 3D CAD] |
17 18 19 20 21 |
12 12 12 12 12 |
28 30 31 32 34 |
34 36 38 40 42 |
38 40 42 44 46 |
20 20 20 20 20 |
10 10 10 10 10 |
30 30 30 30 30 |
- - - - - |
- - - - - |
S1 S1 S1 S1 S1 |
3.67 4.005 4.345 4.688 5.035 |
0.2001 0.2277 0.2571 0.2883 0.3215 |
35.99 39.28 42.61 45.97 49.38 |
1.962 2.233 2.521 2.827 3.153 |
0.120.26 0.12 0.260.12 0.260.12 0.260.14 0.3 |
0.18 0.2 0.22 0.22 0.28 |
SS2-17 SS2-18 SS2-19 SS2-20 SS2-21 |
| SS2-22 [ DXF| DWG| 3D CAD] SS2-23 [ DXF| DWG| 3D CAD] SS2-24 [ DXF| DWG| 3D CAD] SS2-25 [ DXF| DWG| 3D CAD] SS2-26 [ DXF| DWG| 3D CAD] |
22 23 24 25 26 |
12 12 12 12 12 |
36 37 38 40 42 |
44 46 48 50 52 |
48 50 52 54 56 |
20 20 20 20 20 |
10 10 10 10 10 |
30 30 30 30 30 |
- - - - - |
- - - - - |
S1 S1 S1 S1 S1 |
5.385 5.738 6.093 6.451 6.812 |
0.3565 0.3934 0.4322 0.4729 0.5136 |
52.81 56.27 59.75 63.26 66.8 |
3.496 3.858 4.238 4.638 5.037 |
0.140.3 0.14 0.30.14 0.30.14 0.30.14 0.3 |
0.3 0.32 0.35 0.4 0.42 |
SS2-22 SS2-23 SS2-24 SS2-25 SS2-26 |
| SS2-27 [ DXF| DWG| 3D CAD] SS2-28 [ DXF| DWG| 3D CAD] SS2-29 [ DXF| DWG| 3D CAD] SS2-30 [ DXF| DWG| 3D CAD] SS2-32 [ DXF| DWG| 3D CAD] |
27 28 29 30 32 |
12 12 12 12 12 |
45 45 47 50 50 |
54 56 58 60 64 |
58 60 62 64 68 |
20 20 20 20 20 |
10 10 10 10 10 |
30 30 30 30 30 |
- - - - - |
- - - - - |
S1 S1 S1 S1 S1 |
7.174 7.538 7.905 8.272 9.013 |
0.556 0.6001 0.6459 0.6935 0.7938 |
70.35 73.92 77.52 81.12 88.39 |
5.452 5.885 6.334 6.801 7.784 |
0.140.3 0.14 0.30.14 0.30.14 0.30.14 0.3 |
0.47 0.5 0.58 0.58 0.64 |
SS2-27 SS2-28 SS2-29 SS2-30 SS2-32 |
| SS2-34 [ DXF| DWG| 3D CAD] SS2-35 [ DXF| DWG| 3D CAD] SS2-36 [ DXF| DWG| 3D CAD] SS2-38 [ DXF| DWG| 3D CAD] SS2-40 [ DXF| DWG| 3D CAD] |
34 35 36 38 40 |
12 12 12 12 15 |
50 52 55 55 55 |
68 70 72 76 80 |
72 74 76 80 84 |
20 20 20 20 20 |
10 10 10 10 10 |
30 30 30 30 30 |
- - - - - |
- - - - - |
S1 S1 S1 S1 S1 |
9.759 10.13 10.51 11.27 12.02 |
0.9012 0.9575 1.016 1.139 1.27 |
95.7 99.34 103.1 110.5 117.9 |
8.838 9.39 9.963 11.17 12.45 |
0.140.3 0.14 0.30.14 0.30.14 0.30.14 0.3 |
0.74 0.75 0.8 0.9 0.93 |
SS2-34 SS2-35 SS2-36 SS2-38 SS2-40 |
| SS2-42 [ DXF| DWG| 3D CAD] SS2-44 [ DXF| DWG| 3D CAD] SS2-45 [ DXF| DWG| 3D CAD] SS2-46 [ DXF| DWG| 3D CAD] SS2-48 [ DXF| DWG| 3D CAD] |
42 44 45 46 48 |
15 15 15 15 15 |
55 55 55 55 55 |
84 88 90 92 96 |
88 92 94 96 100 |
20 20 20 20 20 |
10 10 10 10 10 |
30 30 30 30 30 |
- - - - - |
- - - - - |
S1 S1 S1 S1 S1 |
12.79 13.55 13.94 14.32 15.09 |
1.408 1.553 1.628 1.706 1.866 |
125.4 132.9 136.7 140.4 148 |
13.81 15.23 15.97 16.73 18.3 |
0.180.36 0.18 0.360.18 0.360.18 0.360.18 0.36 |
1 1.1 1.1 1.2 1.3 |
SS2-42 SS2-44 SS2-45 SS2-46 SS2-48 |
| SS2-50 [ DXF| DWG| 3D CAD] SS2-52 [ DXF| DWG| 3D CAD] SS2-54 [ DXF| DWG| 3D CAD] SS2-55 [ DXF| DWG| 3D CAD] SS2-56 [ DXF| DWG| 3D CAD] |
50 52 54 55 56 |
15 15 15 15 15 |
55 55 55 55 55 |
100 104 108 110 112 |
104 108 112 114 116 |
20 20 20 20 20 |
10 10 10 10 10 |
30 30 30 30 30 |
- - - - - |
- - - - - |
S1 S1 S1 S1 S1 |
15.87 16.64 17.42 17.81 18.2 |
2.033 2.208 2.39 2.484 2.58 |
155.6 163.2 170.8 174.7 178.5 |
19.94 21.65 23.44 24.36 25.3 |
0.180.36 0.18 0.360.18 0.360.18 0.360.18 0.36 |
1.4 1.5 1.6 1.6 1.7 |
SS2-50 SS2-52 SS2-54 SS2-55 SS2-56 |
| SS2-58 [ DXF| DWG| 3D CAD] SS2-60 [ DXF| DWG| 3D CAD] SS2-62 [ DXF| DWG| 3D CAD] SS2-64 [ DXF| DWG| 3D CAD] SS2-65 [ DXF| DWG| 3D CAD] |
58 60 62 64 65 |
15 15 15 15 15 |
60 60 60 60 60 |
116 120 124 128 130 |
120 124 128 132 134 |
20 20 20 20 20 |
10 10 10 10 10 |
30 30 30 30 30 |
- - - - - |
- - - - - |
S1 S1 S1 S1 S1 |
18.98 19.76 20.55 21.33 21.73 |
2.781 2.991 3.209 3.435 3.551 |
186.1 193.8 201.5 209.2 213.1 |
27.27 29.33 31.47 33.69 34.82 |
0.180.36 0.18 0.360.18 0.360.18 0.360.18 0.36 |
1.8 1.9 2 2.1 2.3 |
SS2-58 SS2-60 SS2-62 SS2-64 SS2-65 |
| SS2-66 [ DXF| DWG| 3D CAD] SS2-68 [ DXF| DWG| 3D CAD] SS2-70 [ DXF| DWG| 3D CAD] SS2-72 [ DXF| DWG| 3D CAD] SS2-75 [ DXF| DWG| 3D CAD] |
66 68 70 72 75 |
15 15 15 15 20 |
60 60 60 60 60 |
132 136 140 144 150 |
136 140 144 148 154 |
20 20 20 20 20 |
10 10 10 10 10 |
30 30 30 30 30 |
- - - - - |
- - - - - |
S1 S1 S1 S1 S1 |
22.12 22.91 23.7 24.49 25.67 |
3.669 3.911 4.161 4.419 4.822 |
216.9 224.7 232.4 240.2 251.7 |
35.98 38.35 40.81 43.34 47.29 |
0.180.36 0.18 0.360.18 0.360.18 0.360.18 0.36 |
2.4 2.6 2.6 2.7 2.9 |
SS2-66 SS2-68 SS2-70 SS2-72 SS2-75 |
| SS2-76 [ DXF| DWG| 3D CAD] SS2-80 [ DXF| DWG| 3D CAD] SS2-84 [ DXF| DWG| 3D CAD] SS2-85 [ DXF| DWG| 3D CAD] SS2-88 [ DXF| DWG| 3D CAD] |
76 80 84 85 88 |
20 20 20 20 20 |
60 60 70 70 70 |
152 160 168 170 176 |
156 164 172 174 180 |
20 20 20 20 20 |
10 10 10 10 10 |
30 30 30 30 30 |
- 12 12 12 12 |
- 136 140 146 150 |
S1 S2 S2 S2 S2 |
26.07 27.65 29.24 29.64 30.83 |
4.96 5.533 6.139 6.295 6.777 |
255.7 271.2 286.7 290.7 302.3 |
48.64 54.26 60.2 61.73 66.46 |
0.180.36 0.18 0.360.22 0.440.22 0.440.22 0.44 |
3.1 2.6 3 3 3.4 |
SS2-76 SS2-80 SS2-84 SS2-85 SS2-88 |
| SS2-90 [ DXF| DWG| 3D CAD] SS2-95 [ DXF| DWG| 3D CAD] SS2-100 [ DXF| DWG| 3D CAD] SS2-120 [ DXF| DWG| 3D CAD] SS2-150 [ DXF| DWG| 3D CAD] |
90 95 100 120 150 |
20 20 20 20 25 |
70 70 70 90 240 |
180 190 200 240 300 |
184 194 204 244 304 |
20 20 20 20 20 |
10 10 10 10 10 |
30 30 30 30 30 |
12 12 12 12 - |
156 166 176 210 - |
S2 S2 S2 S2 S1 |
31.63 33.62 29.68 36.35 46.39 |
7.108 7.973 7.418 10.98 17.74 |
310.2 329.7 291.1 356.5 454.9 |
69.7 78.19 72.74 107.7 174 |
0.220.44 0.22 0.440.22 0.440.22 0.440.22 0.44 |
3.4 3.7 3.8 6.2 14.5 |
SS2-90 SS2-95 SS2-100 SS2-120 SS2-150 |
|
|
NOTE : The allowable torques shown in the table are the calculated
values according to JGMA Standards 401-01 and 402-01. The backlash values
shown in the table are the theoretical values of a pair of identical gears in
mesh.
USEFUL HINT: By chamfering the corners of the top land of the gear tooth, gear noise is reduced, and the chance of damage occuring during handing and transportation is decreased. All KHK gears larger than module 1.5 have their teeth chamfered in this manner.
| Home | QTC Quote Request Form | US&Canada Request Form | International Request Form | Q410 Index | Recent AdsQuality
Transmission Components |
||
Related
Companies: 
|
||
