|
|
|
  |
   |
|
|
| ||||||||||||||||||||||
|
CP 5
| Catalog No. | Pitch mm (m) | Total length | Face width | Height | Height to pitch line |
Thickness of base |
Width of base |
Effective No. of teeth |
Shape | Allowable force |
Weight (kgf) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | Bending strength (kgf) |
Bending strength (N) | |||||
|
FRCP5-2000 [ DXF | DWG | 3D CAD ] FRCP5-3000 [ DXF | DWG | 3D CAD ] FRCP5-4000 [ DXF | DWG | 3D CAD ] |
CP5 (1.5915) CP5 (1.5915) CP5 (1.5915) |
2000 3000 4000 |
10 10 10 |
6 6 6 |
4.41 4.41 4.41 |
2 2 2 |
17 17 17 |
397 597 797 |
R3 R3 R3 |
81.65 81.65 81.65 |
800.9 800.9 800.9 |
0.9 1.36 1.82 |
|
|
| CAUTION: | When using the metal flexible rack with a 20 tooth pinion, allow a minimum radius of curvature of 150mm for the teeth on the exterior and 300mm for the teeth in the interior side. |
|---|---|
| CAUTION: | These metal flexible racks are not suitable for applications where positioning accuracy is required. |
| NOTE: | The allowable forces shown in the table are for racks mating with 30 tooth pinions calculated according to JGMA Standards 401-01 and 402-01. All dimensions shown in the above table(s) are listed in millimeters unless otherwise specified. |
| NOTE: | The tolerance of the height (C) is 0/-0.15 and the tolerance of the width of the base (F) is 0/-0.1. |
| Home | QTC Quote Request Form | US & Canada Catalog Request Form | International Catalog Request Form | Q420 Index | Recent Ads | Kohara Gear HomepageQuality
Transmission Components |
||
Related
Companies: 
|
||
