Metric Stainless Steel Spur Gears Module 5~10

Quality Transmission is the largest North American supplier of off-the-shelf metric gearing.

Specifications
Precision grade	JIS Grade N8 (JIS B 1702-1:1998) JIS Grade 4 (JIS B 1702:1976)	Core hardness	Less than HB187
Gear teeth	Standard full depth	Surface hardness	Less than HB187
Pressure angle	20	Surface treatment	-
Material	SUS303 (Stainless steel)	Surface finish	Hobbed
Heat treatment	-	Datum reference surface for gear cutting	Bore

CP 5 (m1.5915)

Please click on the catalog number to view pricing and availability

Catalog No.	No. of teeth	Bore	Hub dia.	Pitch dia.	Outside dia.	Face width	Hub width	Total length	* Distance traveled in one turn	Shape	Allowable torque (kgfm)		Allowable torque (Nm)		Backlash (mm)	Weight (kgf)	Catalog No.
Catalog No.	z	A_H7	B	C	D	E	F	G	* Distance traveled in one turn	Shape	Bending strength	Surface durability	Bending strength	Surface durability	Backlash (mm)	Weight (kgf)	Catalog No.
SUSCP5-20 [DXF \| DWG \| 3D CAD] SUSCP5-25 [DXF \| DWG \| 3D CAD] SUSCP5-30 [DXF \| DWG \| 3D CAD]	20 25 30	8 10 10	25 32 38	31.83 39.79 47.75	35.01 42.97 50.93	15 15 15	15 15 15	30 30 30	100 125 150	S1 S1 S1	1.23 1.693 2.171	0.0954 0.1556 0.2286	12.06 16.6 21.29	0.9355 1.526 2.242	0.090.26 0.100.28 0.100.28	0.16 0.22 0.4	SUSCP5-20 SUSCP5-25 SUSCP5-30

CP 10 (m3.1831)

Please click on the catalog number to view pricing and availability

Catalog No.	No. of teeth	Bore	Hub dia.	Pitch dia.	Outside dia.	Face width	Hub width	Total length	* Distance traveled in one turn	Shape	Allowable torque (kgfm)		Allowable torque (Nm)		Backlash (mm)	Weight (kgf)	Catalog No.
Catalog No.	z	A_H7	B	C	D	E	F	G	* Distance traveled in one turn	Shape	Bending strength	Surface durability	Bending strength	Surface durability	Backlash (mm)	Weight (kgf)	Catalog No.
SUSCP10-20 [DXF \| DWG \| 3D CAD] SUSCP10-25 [DXF \| DWG \| 3D CAD] SUSCP10-30 [DXF \| DWG \| 3D CAD]	20 25 30	15 20 20	50 60 75	63.66 79.57 95.49	70.03 85.94 101.86	30 30 30	20 20 20	50 50 50	200 250 300	S1 S1 S1	9.843 13.54 17.37	0.8219 1.338 1.966	96.53 132.8 170.3	8.06 13.12 19.28	0.140.36 0.160.39 0.160.39	1.1 1.7 2.5	SUSCP10-20 SUSCP10-25 SUSCP10-30

*CAUTION:*	SUSCP and SUS spur gears are similar in appearance and dimensions. Please check the identifying marking before use.
*NOTE:*	The mark * denotes the distance in mm that a pinion travels on a rack in one revolution.
*NOTE:*	The allowable torques shown in the table are calculated values according to JGMA Standards 401-01 and 402-01. The backlash values shown in the table are the theoretical values when meshed with SRCPF racks. All dimensions shown in the above table(s) are listed in millimeters unless otherwise specified.