|
|
|
|
| ||||||||||||||||||||||||
| |||||||||||||||||||||||||
|
CP 2.5
20
| Catalog No. | Pitch mm (m) | Total length | Face width | Height | Height to pitch line |
Effective No. of teeth |
Shape | Allowable force (kgf) |
Allowable force (N) |
Weight (kgf) |
Catalog No. | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | Bending strength |
Surface durability |
Bending strength |
Surface durability | ||||||
|
SRCP5-100 [DXF | DWG | 3D CAD] SRCP10-100 [DXF | DWG | 3D CAD] SRCP15-100 [DXF | DWG | 3D CAD] SRCP20-100 [DXF | DWG | 3D CAD] |
CP5 (1.5915) CP10 (3.1831) CP15 (4.7746) CP20 (6.3662) |
98 98 103 98 |
15 30 50 60 |
20 35 50 60 |
18.41 31.82 45.23 53.63 |
18 8 5 3 |
R1 R1 R1 R1 |
233.3 933.1 2333 3732 |
47.67 190.7 461.7 762.7 |
2288 9150 22880 36600 |
467.5 1870 4528 7479 |
0.22 0.75 1.9 2.5 |
SRCP5-100 SRCP10-100 SRCP15-100 SRCP20-100 |
|
SRCP2.5-1000 [DXF | DWG | 3D CAD] SRCP5-1000 [DXF | DWG | 3D CAD] SRCP10-1000 [DXF | DWG | 3D CAD] |
CP2.5 (0.7958) CP5 (1.5915) CP10 (3.1831) |
1010 1010 1010 |
10 15 30 |
12 20 35 |
11.2 18.41 31.82 |
404 200 100 |
R1 R1 R1 |
77.76 233.3 933.1 |
14.53 47.67 190.7 |
762.6 2288 9150 |
142.5 467.5 1870 |
1.1 2.2 7.6 |
SRCP2.5-1000 SRCP5-1000 SRCP10-1000 |
| NOTE: | 100mm (nominal length) racks can be used as the joining gauge to connect two racks end to end. |
|---|
CP 5
20Type F
| Catalog No. | Pitch mm (m) | Total length | Face width | Height | Height to pitch line |
Effective No. of teeth |
Shape | Allowable force (kgf) |
Allowable force (N) |
Weight (kgf) |
Catalog No. | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | Bending strength |
Surface durability |
Bending strength |
Surface durability | ||||||
|
SRCPF5-1000 [DXF | DWG | 3D CAD] SRCPF10-1000 [DXF | DWG | 3D CAD] SRCPF15-1000 [DXF | DWG | 3D CAD] SRCPF20-1000 [DXF | DWG | 3D CAD] |
CP5 (1.5915) CP10 (3.1831) CP15 (4.7746) CP20 (6.3662) |
1000 1000 1005 1000 |
15 30 50 60 |
20 35 50 60 |
18.41 31.82 45.23 53.63 |
200 100 67 50 |
R1 R1 R1 R1 |
233.3 933.1 2333 3732 |
47.67 190.7 461.7 762.7 |
2288 9150 22880 36600 |
467.5 1870 4528 7479 |
2.2 7.6 17.7 25 |
SRCPF5-1000 SRCPF10-1000 SRCPF15-1000 SRCPF20-1000 |
|
SRCPF5-1500 [DXF | DWG | 3D CAD] SRCPF10-1500 [DXF | DWG | 3D CAD] SRCPF15-1500 [DXF | DWG | 3D CAD] SRCPF20-1500 [DXF | DWG | 3D CAD] |
CP5 (1.5915) CP10 (3.1831) CP15 (4.7746) CP20 (6.3662) |
1500 1500 1500 1500 |
15 30 50 60 |
20 35 50 60 |
18.41 31.82 45.23 53.63 |
300 150 100 75 |
R1 R1 R1 R1 |
233.3 933.1 2333 3732 |
47.67 190.7 461.7 762.7 |
2288 9150 22880 36600 |
467.5 1870 4528 7479 |
3.3 11.2 26.4 37.5 |
SRCPF5-1500 SRCPF10-1500 SRCPF15-1500 SRCPF20-1500 |
|
SRCPF5-2000 [DXF | DWG | 3D CAD] SRCPF10-2000 [DXF | DWG | 3D CAD] SRCPF15-2000 [DXF | DWG | 3D CAD] SRCPF20-2000 [DXF | DWG | 3D CAD] |
CP5 (1.5915) CP10 (3.1831) CP15 (4.7746) CP20 (6.3662) |
2050 2050 2040 2040 |
15 30 50 60 |
20 35 50 60 |
18.41 31.82 45.23 53.63 |
410 205 136 102 |
R1 R1 R1 R1 |
233.3 933.1 2333 3732 |
47.67 190.7 461.7 762.7 |
2288 9150 22880 36600 |
467.5 1870 4528 7479 |
4.4 15.4 35.9 51 |
SRCPF5-2000 SRCPF10-2000 SRCPF15-2000 SRCPF20-2000 |
| CAUTION: | The last tooth of the machined end racks has the pitch tolerance of 0 to -0.1mm. |
|---|
CP 5
10 Type D
| Catalog No. |  Pitch mm (m)  | Total length | Face width | Height | Height to pitch line |
Effective No. of teeth |
Mounting hole dimensions | No. of mounting holes |
Mounting screw size | Counterbore and hole dimensions | Shape | Allowable force (kgf) |
Allowable force (N) |
Weight (kgf) |
Catalog No. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | G | H | I | J | K | Bending strength |
Surface durability |
Bending strength |
Surface durability | ||||||||
|
SRCPFD5-1000 [DXF | DWG | 3D CAD] SRCPFD10-1000 [DXF | DWG | 3D CAD] SRCPFD15-1000 [DXF | DWG | 3D CAD] SRCPFD20-1000 [DXF | DWG | 3D CAD] |
CP5 (1.5915) CP10 (3.1831) CP15 (4.7746) CP20 (6.3662) |
1000 1000 1005 1000 |
15 30 50 60 |
20 35 50 60 |
18.41 31.82 45.23 53.63 |
200 100 67 50 |
8 14 20 23 |
50 50 62.5 60 |
180 180 220 220 |
6 6 5 5 |
M5 M10 M14 M16 |
6 11 16 18 |
10 17.5 23 26 |
6 11 16 18 |
9 19 34 42 |
R1 R1 R1 R1 |
233.3 933.1 2333 3732 |
47.67 190.7 461.7 762.7 |
2288 9150 22880 36600 |
467.5 1870 4528 7479 |
2.1 7.4 17.2 24.2 |
SRCPFD5-1000 SRCPFD10-1000 SRCPFD15-1000 SRCPFD20-1000 |
|
SRCPFD5-1500 [DXF | DWG | 3D CAD] SRCPFD10-1500 [DXF | DWG | 3D CAD] SRCPFD15-1500 [DXF | DWG | 3D CAD] SRCPFD20-1500 [DXF | DWG | 3D CAD] |
CP5 (1.5915) CP10 (3.1831) CP15 (4.7746) CP20 (6.3662) |
1500 1500 1500 1500 |
15 30 50 60 |
20 35 50 60 |
18.41 31.82 45.23 53.63 |
300 150 100 75 |
8 14 20 23 |
30 30 90 90 |
180 180 220 220 |
9 9 7 7 |
M5 M10 M14 M16 |
6 11 16 18 |
10 17.5 23 26 |
6 11 16 18 |
9 19 34 42 |
R1 R1 R1 R1 |
233.3 933.1 2333 3732 |
47.67 190.7 461.7 762.7 |
2288 9150 22880 36600 |
467.5 1870 4528 7479 |
3.2 11 25.7 36.4 |
SRCPFD5-1500 SRCPFD10-1500 SRCPFD15-1500 SRCPFD20-1500 |
|
SRCPFD5-2000 [DXF | DWG | 3D CAD] SRCPFD10-2000 [DXF | DWG | 3D CAD] SRCPFD15-2000 [DXF | DWG | 3D CAD] SRCPFD20-2000 [DXF | DWG | 3D CAD] |
CP5 (1.5915) CP10 (3.1831) CP15 (4.7746) CP20 (6.3662) |
2050 2050 2040 2040 |
15 30 50 60 |
20 35 50 60 |
18.41 31.82 45.23 53.63 |
410 205 136 102 |
8 14 20 23 |
35 35 30 30 |
180 180 220 220 |
12 12 10 10 |
M5 M10 M14 M16 |
6 11 16 18 |
10 17.5 23 26 |
6 11 16 18 |
9 19 34 42 |
R1 R1 R1 R1 |
233.3 933.1 2333 3732 |
47.67 190.7 461.7 762.7 |
2288 9150 22880 36600 |
467.5 1870 4528 7479 |
4.4 15.1 34.8 49.4 |
SRCPFD5-2000 SRCPFD10-2000 SRCPFD15-2000 SRCPFD20-2000 |
| NOTE: | The dimensions "E" and "F" have the general tolerance. |
|---|---|
| NOTE: | The allowable forces shown in the table are for racks mating with 30 teeth pinions calculated according to JGMA Standards 401-01 and 402-01. |
CP 5
10 Type F
| Catalog No. | Pitch mm (m) | Total length | Face width | Height | Height to pitch line |
Effective No. of teeth |
Shape | Allowable force (kgf) |
Allowable force (N) |
Weight (kgf) |
Catalog No. | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | Bending strength |
Surface durability |
Bending strength |
Surface durability | ||||||
|
KRCPF5-1000 [DXF | DWG | 3D CAD] KRCPF10-1000 [DXF | DWG | 3D CAD] |
CP5 (1.5915) CP10 (3.1831) |
1000 1000 |
15 30 |
20 35 |
18.41 31.82 |
200 100 |
R1 R1 |
373.2 1493 |
105.8 456.7 |
3660 14640 |
1038 4479 |
2.2 7.5 |
KRCPF5-1000 KRCPF10-1000 |
NOTE: The allowable torques shown in the table are the calculated values according to the assumed usage conditions. All dimensions shown in the above table(s) are listed in millimeters unless otherwise specified.
| Home | QTC Quote Request Form | US & Canada Catalog Request Form | International Catalog Request Form | Q420 Index | Recent Ads | Kohara Gear HomepageQuality
Transmission Components |
||
| Related
Companies: |
||