Metric Worms, Worm Gears Module 3

Quality Transmission is the largest North American supplier of off-the-shelf metric gearing.

Specifications
Catalog No.	SW	BG	CG
Precision grade	KHK W 001 grade 4	KHK W 002 grade 4	KHK W 002 grade 4
Reference section of gear	Normal plane	Normal plane	Normal plane
Gear teeth	JIS 3 type Standard full depth	Standard full depth	Standard full depth
Normal pressure angle	1430'	1430'	1430'
Material	S45C (Carbon steel)	PBC2 and BC6 (Bronz)	FC200 (Gray iron)
Heat treatment	-	-	-
Surface hardness	Less than 194	-	-
Surface treatment	Black oxide	-	-
Surface finish	Cut	Cut	Cut
Datum reference surface for teeth cutting	Bore	Bore	Bore


W1	H1

H2	HB

Module 3 Worms

Catalog No.	Number of start	Hand of thread	Bore	Hub dia.	Pitch dia.	Outside dia.	Face width	Hub width (R)	Hub width (L)	Total length	Screw		Shape	Weight (kgf)
Catalog No.	Number of start	Hand of thread	L_H7	M	N	O	P	Q	Q'	R	Size	S	Shape	Weight (kgf)
SW3-R1 [ DXF \| DWG \| 3D CAD] SW3-R2 [ DXF \| DWG \| 3D CAD]	1 2	R R	16 16	35 35	44 44	50 50	50 50	20 20	- -	70 70	- -	- -	W1 W1	0.6 0.6

Catalog No. Number of
start Hand of
thread Bore Hub dia. Pitch dia. Outside dia. Face width Hub width (R) Hub width (L) Total length Screw Shape Weight
(kgf)

L_H7 M N O P Q Q' R Size S

SW3-L1
[ DXF | DWG | 3D CAD]
SW3-L2
[ DXF | DWG | 3D CAD] 1

2

L

L

16

16

35

35

44

44

50

50

50

50

20

20

-

-

70

70

-

-

-

-

W1

W1

0.6

0.6

Lead Angle R1(L1) 3

55' R2(L2) 7

50'

Module 3 Worm Gears

Catalog No.	Reduction ratio	No. of teeth	Coefficient of profile shift	Number of start	Hand of thread	Bore	Hub dia.	Pitch dia.	Throat dia.	Outside dia.	Face width	Hub width	Total length	Mounting distance	Shape	Allowable torque (kgfm)	Allowable torque (Nm)	Backlash (mm)	Weight (kgf)	Catalog No.
Catalog No.	Reduction ratio	No. of teeth	Coefficient of profile shift	Number of start	Hand of thread	A_H7	B	C	D	D'	E	F	G	J	Shape	Surface durability	Surface durability	Backlash (mm)	Weight (kgf)	Catalog No.
BG3-20R1 [ DXF\|DWG \| 3D CAD] BG3-20R2 [ DXF\|DWG \| 3D CAD]	1/20 1/10	20 20	-0.023 -0.094	1 2	R R	20 20	50 50	60.14 60.57	66 66	69 69	28 28	15 15	43 43	52 52	H1 H1	1.17 1.09	11.47 10.72	0.190.29 0.190.29	0.84 0.84	BG3-20R1 BG3-20R2

Catalog No.	Reduction ratio	No. of teeth	Coefficient of profile shift	Number of start	Hand of thread	Bore	Hub dia.	Pitch dia.	Throat dia.	Outside dia.	Face width	Hub width	Total length	Mounting distance	Shape	Allowable torque (kgfm)	Allowable torque (Nm)	Backlash (mm)	Weight (kgf)	Catalog No.
Catalog No.	Reduction ratio	No. of teeth	Coefficient of profile shift	Number of start	Hand of thread	A_H7	B	C	D	D'	E	F	G	J	Shape	Surface durability	Surface durability	Backlash (mm)	Weight (kgf)	Catalog No.
BG3-20L1 [ DXF\|DWG \| 3D CAD] BG3-20L2 [ DXF\|DWG \| 3D CAD]	1/20 1/10	20 20	-0.023 -0.094	1 2	L L	20 20	50 50	60.14 60.57	66 66	69 69	28 28	15 15	43 43	52 52	H1 H1	1.07 1.09	11.47 10.72	0.190.29 0.190.29	0.84 0.84	BG3-20L1 BG3-20L2

Module 3 Worm Gears

Catalog No.	Reduction ratio	No. of teeth	Coefficient of profile shift	Number of start	Hand of thread	Bore	Hub dia.	Pitch dia.	Throat dia.	Outside dia.	Face width	Hub width (R)	Hub width (L)	Total length	Web thickness	Web O.D.	Mounting distance	Shape	Allowable torque (kgfm)	Allowable torque (Nm)	Backlash (mm)	Weight (kgf)	Catalog No.
Catalog No.	Reduction ratio	No. of teeth	Coefficient of profile shift	Number of start	Hand of thread	A_H7	B	C	D	D'	E	F	F'	G	H	I	J	Shape	Surface durability	Surface durability	Backlash (mm)	Weight (kgf)	Catalog No.
CG3-20R1 [ DXF\|DWG \| 3D CAD] CG3-20R2 [ DXF\|DWG \| 3D CAD] CG3-30R1 [ DXF\|DWG \| 3D CAD] CG3-30R2 [ DXF\|DWG \| 3D CAD] CG3-40R1 [ DXF\|DWG \| 3D CAD]	1/20 1/10 1/30 1/15 1/40	20 20 30 30 40	-0.023 -0.094 -0.035 -0.141 -0.047	1 2 1 2 1	R R R R R	20 20 20 20 20	50 50 55 55 55	60.14 60.57 90.21 90.85 120.28	66 66 96 96 126	69 69 99 99 129	28 28 28 28 30	15 15 15 15 15	- - - - -	43 43 43 43 45	- - - - 9	- - - - 107	52 52 67 67 82	H1 H1 H1 H1 HB	1.17 1.09 2.59 2.42 4.55	11.47 10.72 25.35 23.7 44.57	0.190.29 0.190.29 0.190.29 0.190.29 0.190.29	0.7 0.7 1.4 1.4 1.9	CG3-20R1 CG3-20R2 CG3-30R1 CG3-30R2 CG3-40R1
CG3-50R1 [ DXF\|DWG \| 3D CAD] CG3-50R2 [ DXF\|DWG \| 3D CAD] CG3-60R1 [ DXF\|DWG \| 3D CAD]	1/50 1/25 1/60	50 50 60	-0.058 -0.236 -0.07	1 2 1	R R R	20 20 20	63 63 70	150.35 150.41 180.42	156 156 186	159 159 189	30 30 30	15 15 15	- - -	45 45 45	9 9 9	138 138 166	97 97 112	HB HB HB	6.98 6.63 9.86	68.42 65.05 96.68	0.190.29 0.190.29 0.190.29	2.5 2.5 4	CG3-50R1 CG3-50R2 CG3-60R1

Catalog No.	Reduction ratio	No. of teeth	Coefficient of profile shift	Number of start	Hand of thread	Bore	Hub dia.	Pitch dia.	Throat dia.	Outside dia.	Face width	Hub width (R)	Hub width (L)	Total length	Web thickness	Web O.D.	Mounting distance	Shape	Allowable torque (kgfm)	Allowable torque (Nm)	Backlash (mm)	Weight (kgf)	Catalog No.
Catalog No.	Reduction ratio	No. of teeth	Coefficient of profile shift	Number of start	Hand of thread	A_H7	B	C	D	D'	E	F	F'	G	H	I	J	Shape	Surface durability	Surface durability	Backlash (mm)	Weight (kgf)	Catalog No.
CG3-20L1 [ DXF\|DWG \| 3D CAD] CG3-20L2 [ DXF\|DWG \| 3D CAD] CG3-30L1 [ DXF\|DWG \| 3D CAD] CG3-30L2 [ DXF\|DWG \| 3D CAD] CG3-40L1 [ DXF\|DWG \| 3D CAD]	1/20 1/10 1/30 1/15 1/40	20 20 30 30 40	-0.023 -0.094 -0.035 -0.141 -0.047	1 2 1 2 1	L L L L L	20 20 20 20 20	50 50 55 55 55	60.14 60.57 90.21 90.85 120.28	66 66 96 96 126	69 69 99 99 129	28 28 28 28 30	15 15 15 15 15	- - - - -	43 43 43 43 45	- - - - 9	- - - - 107	52 52 67 67 82	H1 H1 H1 H1 HB	1.17 1.09 2.59 2.42 4.55	11.47 10.72 25.35 23.7 44.57	0.190.29 0.190.29 0.190.29 0.190.29 0.190.29	0.7 0.7 1.4 1.4 1.9	CG3-20L1 CG3-20L2 CG3-30L1 CG3-30L2 CG3-40L1
CG3-50L1 [ DXF\|DWG \| 3D CAD] CG3-50L2 [ DXF\|DWG \| 3D CAD] CG3-60L1 [ DXF\|DWG \| 3D CAD]	1/50 1/25 1/60	50 50 60	-0.058 -0.236 -0.07	1 2 1	L L L	20 20 20	63 63 70	150.35 150.41 180.42	156 156 186	159 159 189	30 30 30	15 15 15	- - -	45 45 45	9 9 9	138 138 166	97 97 112	HB HB HB	6.98 6.63 9.86	68.42 65.05 96.68	0.190.29 0.190.29 0.190.29	2.5 2.5 4	CG3-50L1 CG3-50L2 CG3-60L1

*CAUTION:*	Before assembling or performing any secondary operations, please carefully read the "Application Hints" at the beginning of this section.
*CAUTION:*	Heat treating these worms is not recommended since it will introduce errors in the lead and pressure angles, producing poor gear mesh.
*CAUTION:*	These worm gears are profile shifted to create the proper center distance.
*NOTE:*	Allowable torques shown in the table are the calculated values according to JGMA Standards 405-01 when the worm is rotating at 600 rpm, The table below shows the allowable worm gear torques at selected worm speeds.
*NOTE:*	SUW worms may also be used to mate with BG and CG worm gears.

BG3 Allowable Worm Gear Torques(kgfm)

Catalog No.	Worms rpm
Catalog No.	30	100	300	600	900	1200
BG3-20R1 BG3-20R2	2.25 2.26	1.84 1.80	1.44 1.35	1.17 1.09	1.02 0.94	0.93 0.85

CG3 Allowable Worm Gear Torques(kgfm)

Catalog No.	Worms rpm
Catalog No.	30	100	300	600	900	1200
CG3-20R1 CG3-20R2 CG3-30R1 CG3-30R2 CG3-40R1 CG3-50R1 CG3-50R2 CG3-60R1	2.25 2.26 4.75 4.81 8.14 12.30 12.43 17.21	1.84 1.80 3.94 3.92 6.76 10.22 10.21 14.37	1.44 1.35 3.12 2.99 5.42 8.27 8.06 11.64	1.17 1.09 2.59 2.42 4.55 6.98 6.63 9.86	1.02 0.94 2.27 2.12 3.99 6.17 5.78 8.80	0.93 0.85 2.06 1.91 3.64 5.66 5.29 8.05

| Home | QTC Quote Request Form | US & Canada Catalog Request Form | International Catalog Request Form | Q420 Index | Recent Ads | Kohara Gear Homepage

Quality Transmission Components
E-Mail: qtcsupport@qtcgears.com
Phone: 516-437-6700
Fax: 800-737-7436 or 516-328-3343

Related Companies: